Mục lục
The structure of the control box on a scissor lift might be unfamiliar to you. Dingli manufactures scissor lift with two control boxes: one located under the vehicle’s chassis and the other on the operator’s platform.
In this article, we share information about the basic structure of the control box on a scissor lift. What are the buttons on the control box? and the functions of each button on the control box.
The control box under the chassis of the scissor lift
1. Base/ Platform Selector Switch: Select BASE position to control operation of machine using the base controls. Select Platform position to control operation of machine using the platform control box.
2. Raise Switch: Use to control the lift of the plaform from the base panel, when BASE position is selected.
3. Lower Switch: Use to control lowering of the platform the base controls when BASE position is selected
4. Emergency Stop button: Use to stop all funtions in an emergency. Push for emergency stop. To reset turn clockwise.
5. Charge Indicator: Indicates state of battery charge
6. Hour meter: Indicates total elapsed time the engine has been operated
7. Circuit-Breaker: Pops out when there is excessive electrical load in the 12 Volt control circuit. Push in to reset (see service and parts manual)
8. Battery disconnect: Disconnects battery power supply. Turn Off and padlock to secure machine from anauthorized use.
The control box on the working platform of the scissor lift
1. Mode selector: Desired selection will allow either the lift or drive funtion using controller handle.
2. Enable Bar: Must be depressed to activate drive, steer, and lift functions
3. Joystick: Drive: Controls forward and reverse machine travel at stepped speeds. Lift: with enable switch depressed, moving controller handle towards the operator will provide proportional platform lift. Moving the handle away from the operator will provide platform lowering at a fixed speed.
4. Steering: Push steer rocker switch (thumb) to the left and hold to turn steer wheels to the left, right to turn steer wheels to the right.
5. Speed/ Torque Switch: High Torque selection will provide extra driving torque and reduce speed. Mid range selection will provide medium driving torque and speed. High speed selection will provide high machine speed when platform is under approximately 10 ft (3m).
6. Horn (Option): Press button to sound warning horn
7. Keyswitch: Turn power On or OFF at the platform. Does not affect lower controls.
8. Emergency stop: Push to stop all funtions in emergency. Reset bu turning button clockwode.
9. Indicator Lamp (option): Lamp On indicates outriggers are UP and machine will drive. Lamp OFF indicates outriggers are DOWN and machine will not drive.
10. Retract/ Extend Switch (option): Push toggle switch UP to RETRACT (raise) the outriggers. Push toggle switch DOWN to EXTEN (lower) the outriggers.
The control box on the scissor lift is crucially important. It enables operators to easily control the movement, lifting, and lowering of the vehicle with simple button operations. The design of the control box is compact and user-friendly.
Dingli is the top aerial work platform manufacturer in China. This brand is highly praised by experts for its design specifications, simple configuration, and ease of use. All accessory components are readily available. Therefore, their products are highly favored in the Vietnamese market. Check out the models: Scissor lift for sale and rent by UMAC.
For more detailed information about the vehicles, please contact: +84 833 486 586 for the fastest support!
